top of page

A  Gigabit PoE signal is created by the OPL  PoE Injector, Model PoE5560DGX-OD, by fusing electrical power with a 10G network connection. Up to 100 metres  distance, a PoE injector through ethernet cable (CAT6A)  can power  PD devices, such as a wireless AP, IP camera, IP phone, etc. With a maximum output power of 60W, PoE injectors are a smart option if you want to cut installation costs while enhancing network performance.

PRODUCT DESCRIPTION

-

PoE Injector - PoE5560DGX-OD

  • Indicator device connected (green light) or not connected (red light).

  • Delivers power and data through one Ethernet cable for easy network extension.

  • PoE Port Delivers power up to 100 meters.

  • Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

  • Plug and Play, no configuration required.

FEATURES

+

Data Transfer Rate

  • Gigabit: 2000Mbps (full duplex)

  • Gigabit: 5000Mbps (full duplex)

  • Gigabit: 10000Mbps (full duplex)

  • Gigabit: 20000Mbps (full duplex)

Device Interface
  • 1 x Gigabit Data in port
  • 1 x Gigabit Data & Power out port
  • LED indicators for power & port

Power over Ethernet Output

Pin Assignment and Polarity:

Spare Pairs 4/5 (+) and 7/8 (-) (Mode B)

Output Power Voltage: 55V DC 60W

Input Power Requirement

DC Input Voltage: 36-72V DC

Standards

IEEE 802.3, IEEE802.3u, IEEE 802.3ab

Connectors

2 x RJ45
Operating Temperature

-4°F (-20°C) to +104°F (+40°C)

Operating Humidity

10% to 90% (Non-condensing)

Storage Temperature

-4°F (-20°C) to +158°F (+70°C)

Storage Humidity

10% to 95% (Non-condensing)

Dimensions

297.18 x 243.84 x 101.6 mm

(11.7 x 9.6 x 4 in.)

Weight

1450 g

Warranty

1 Year

Special Features

Wall Mountable

Certifications

EFT: INC 61000-4-4 4kV (EMC)

SPECIFICATIONS

+

bottom of page