top of page

A  Gigabit PoE signal is created by the OPL  PoE Injector, Model PoE5530DGV, by fusing electrical power with a 5G network connection. Up to 100 metres  distance, a PoE injector through ethernet cable (CAT6A)  can power  PD devices, such as a wireless AP, IP camera, IP phone, etc. With a maximum output power of 30W, PoE injectors are a smart option if you want to cut installation costs while enhancing network performance.



PoE Injector - PoE5530DGV

  • Indicator device connected (green light) or not connected (red light).
  • Delivers power and data through one Ethernet cable for easy network extension.
  • PoE Port Delivers power up to 100 meters.
  • Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
  • Plug and Play, no configuration required.



Data Transfer Rate

  • Gigabit: 2000Mbps (full duplex)
  • Gigabit: 5000Mbps (full duplex)
  • Gigabit: 10000Mbps (full duplex)

Device Interface

  • 1 x Gigabit Data in port
  • 1 x Gigabit Data & Power out port
  • LED indicators for power & port

Power over Ethernet Output

Pin Assignment and Polarity:

Spare Pairs 4/5 (+) and 7/8 (-) (Mode B)

Output Power Voltage: 55V DC 30W

Input Power Requirement

DC Input Voltage: 36-72V DC


IEEE 802.3, IEEE802.3u, IEEE 802.3ab


2 x RJ45

Operating Temperature

-4°F (-20°C) to +104°F (+40°C)

Operating Humidity

10% to 90% (Non-condensing)

Storage Temperature

-4°F (-20°C) to +158°F (+70°C)

Storage Humidity

10% to 95% (Non-condensing)


297.18 x 243.84 x 101.6 mm

(11.7 x 9.6 x 4 in.)


1450 g


1 Year

Special Features

Wall Mountable


EFT: INC 61000-4-4 4kV (EMC)



bottom of page